Brand NEW product from Norcros Adhesives

Posted by Polina 15/08/2017 0 Comment(s) Advice,

Brand new product from Norcros Adhesives – PRO GYP BASE

Pro Gyp-Base Fast Track Sealer

  • Tile to 7 day old screeds (up to 95% RH)
  • Kit contains all you need to prepare 25m2

Norcros Pro Gyp-Base is a 3-part preparation system which allows ceramic & porcelain tiles to be fixed onto anhydrite screeds that are a minimum of 7 days old (95% Relative Humidity). The system offers a fast track solution when tiling onto anhydrite screeds, greatly reducing the minimum drying times generally quoted for this type of screed of 1mm/day up to 40mm and an additional 1mm/2 days above 40mm thickness.

Norcros Pro Gyp-Base consists of a primer, moisture suppressant and gritted primer which allow fast track tile installation without detracting from the overall screed strength. It is ideal for use on both unheated and heated anhydrite screeds. Once dry, tiles may be fixed to the Pro Gyp-Base system using Norcros Pro Gyp-Base Adhesive. A 15kg kit contains everything required to prepare and seal approximately 25m2 area.

Tested and approved by Gypsol.

Pro Gyp-Base Fast Track Adhesive

Norcros Pro Gyp-Base Fast Track Adhesive is a white cement-based, flexible, fibre reinforced, thin bed adhesive specially formulated for fixing fully vitrified porcelain, ceramic and stone tiles to Norcros Pro Gyp-Base Fast Track Anhydrite Screed Sealer.

  • Specially formulated for use with Pro Gyp-Base Fast Track Sealer
  • Flexible cementitious adhesive
  • Fibre reinforced
  • System guarantee

The product has a setting time of 3 hours at 20 degrees permitting early trafficking of the tiled installation. The adhesive has excellent thermal ageing properties making it suitable for use on heated floors. Norcros Pro Gyp-Base Fast Track Adhesive is a white cement-based, flexible, fibre reinforced, thin bed adhesive specially formulated for fixing fully vitrified porcelain, ceramic and stone tiles to Norcros Pro Gyp-Base Fast Track Anhydrite Screed Sealer. It has a setting time of 3 hours at 20 degrees, permitting early trafficking of the tiled installation. The adhesive has excellent thermal ageing properties making it suitable for use on heated floors.

SURFACE PREPARATION. Pro Gyp-Base sealer must firstly be applied in accordance with manufacturer’s instructions and be fully dry, clean and dust-free. The sealed floor should be true and flat to permit fixing without visible lipping of tile edges. On floors, any gaps exceeding 3mm under a 2 metre straight edge should be corrected using a suitable Norcros Levelling Compound. This will be particularly appropriate where larger tiles or those with rectified edges are being installed.

For more information please visit http://www.nxadh.co.uk

Products are available to buy in our stores or to order from our website.

www.tilesuk.com

Leave a Comment

Loading...