Description

BAL AF Max – Rubber-Crumb Tile Adhesive with Built-In Uncoupling System

BAL AF Max is a high-yield, rubber-crumb tile adhesive that combines an uncoupling system and fixing adhesive in one solution – eliminating the need for separate uncoupling mats. Designed with advanced anti-fracture technology, it absorbs lateral floor movement, preventing tile cracks and failures.

With a high yield of up to 8.5m² per 17kg bag, you’ll need just 4 bags for a 30m² area, making it a cost-effective solution. Compared to traditional uncoupling mat systems, BAL AF Max offers:

• 40% lower material costs
• 70% faster installation time
• 70% less material weight

Key Benefits

• 2-in-1 solution – adhesive + uncoupling system in one
• No uncoupling mats required – mix with water and apply directly
• Anti-fracture performance – absorbs stress, protects tiles from cracking
• Huge savings – up to 40% lower cost, 70% less time, and 70% fewer materials compared to mat + adhesive systems
• Lightweight installation – less to carry, store, and install
• Meets Building Regulations Part E for sound resistance

Suitable For

• Tile Types: Ceramics, porcelain, fully vitrified tiles, mosaics, natural stone (marble, slate), and more.
• Substrates: Asphalt, bitumen, concrete, cement:sand screeds, anhydrite screeds, plywood overlays, steel, GRP, epoxy coatings, and existing tiles (vinyl, ceramic, quarry, terrazzo).
• Environments: Interior/exterior floors, walls, showers, swimming pools, hydrotherapy pools, heated screeds, and areas with limited movement or vibration.

Technical Data

• Pot Life (at 20°C): 45 minutes
• Grout After: 5 hours
• Colour: Grey
• Pack Size: 17kg (coverage: 7.4 – 8.5m² per bag)
• Classification: BS EN 12004 C1S2
• Temperature Resistance: –30°C to +60°C (up to 100°C for limited exposure)
• Coverage Rates:
  • 10mm x 20mm Round Notch Trowel: 0.435m²/kg
  • 10mm x 10mm Square Notch Trowel: 0.5m²/kg